Benefits & Info:

Iron on patches work best on shirts made from cotton, polyester, or cotton-polyester blends. Nylon or rayon shirts are not good candidates because the material could scorch during the heated application. Vinyl or leather materials won't deliver good results either.
With a simple domestic iron you can adhere this patch to bags, t-shirts, wallets, luggage, jackets or any type of cloth/garment.

Frequently asked questions:

Can You Put an Iron Directly on a Patch?

No, a tea towel or washcloth serves as a barrier between the heat and the patch to prevent potential fabric damage. The adhesive backing can also leave residue stuck onto the iron.

How Do You Iron on a Patch and Make It Stay?

Preheat the iron to a low setting, and place a thin cloth over your patch and garment. Press the iron on the patch long enough for the adhesive to fuse with the fabric. Reverse the garment inside out and repeat. And of course, let it cool before use.

What Fabric Is Best for Iron-on Patches?

We recommend cotton, as it’s designed to handle extreme heat, but always check the manufacturer’s instructions for maximum temperature allowance. Or, test the garment on a small sample fabric beforehand. Iron on patches work best on shirts made from cotton, polyester, or cotton-polyester blends. Nylon or rayon shirts are not good candidates because the material could scorch during the heated application. Vinyl or leather materials won't deliver good results either.

What You’ll Need:

Your iron-on patch
A thin tea towel or washcloth
Iron
Ironing board

Iron-On Patch Instructions:

Ensure your garment is washed, dry, and wrinkle-free.
Set the iron to the correct settings. (Cotton)
Iron the area before placing your patch.
Put the patch on the right position of clothes, the glue side against the clothes (do not remove glue)
Set the temperature at 120-150 degrees or cotton and linen stalls
Put a towel or cloth over the patch and iron for 90 seconds.
Corners must be pressed for several times to ensure all glue will be melted
Reverse the clothing inside out. Place the washcloth or towel over the patch. Then, press and move the iron in a slow circular motion for around 30 seconds.
Check to see if the patch is applied correctly.
Flip the clothing inside out.
Let the garment cool.
It’s now ready to wear!

What to avoid?

Sticking it to edges of the surface. Always stick to flatter surface so adhesive sticks more
Avoid applying on waterproof rainwear, rayon, nylon, velvet, acrylic, minky, leather, vinyl, or any other fabrics with finishes, elastics or heat sensitivity
Avoid washing roughly on the surface with the patch. Be thorough and gentle.
Avoid using hot water, bleach on the patches

Organize your Luggage

LUGGAGE COVERS

4-in-1 Adaptor

Up to 50% discount